Seq runs on most modern Windows configurations. Your requirements will depend on the volume of log events you intend to process.
Log processing from busy applications can be an extremely resource-intensive process. Careful consideration of what data your application needs to log at each level can make a big impact on the hardware needed to collect and view events.
The Seq server is supported on Windows 8.1+ and Windows Server 2012 R2+.
When selecting an operating system, the most recent possible standard Windows Server SKU, currently Windows Server 2019, is recommended and can provide significantly better performance than earlier versions.
Seq plug-in apps will use the system version of the .NET Framework. The Seq app host nominally targets .NET 4.6.2+. The required framework version depends upon the app being run; .NET 4.7.2 (or better) is recommended when possible.
Seq requires a 64-bit physical or virtual machine.
For most light workloads - a few events per second, retained 30 days, - a basic machine with a minimum of the following specifications will provide very good performance:
- 2 CPU cores
- 3 GB RAM
- 50 GB storage
For busier servers, or where many developers use Seq concurrently, additional CPU, RAM and storage will be required. As a rule of thumb, 1 GB RAM per 1.5 million retained events is a good starting point. CPU and IO requirements are highly dependent on the nature of the events being logged, so measuring and tuning based on usage will be necessary.
A starting configuration for a loaded production server is:
- 4 CPU cores
- 16 GB RAM
- 256 GB SSD storage
Seq performs best with SSD-backed storage.
Seq runs in a single-node configuration, so scaling up or down requires adjustment of these numbers, rather than the addition of machines.
Seq accepts events and serves its web interface via HTTP or HTTPS.
The default installation uses HTTP on port 5341. For production work, opening port 80 or 443 as appropriate is recommended.
We retain compatibility with multiple versions of "evergreen" browsers such as Chrome and Firefox, but test on and target the most recent released browser version at the time of each Seq release.
Internet Explorer 10 Support
The Seq UI partially supports Internet Explorer 10 to simplify administration of older servers that may not have another local web browser installed.
Updated over 3 years ago